Amsoil Synthetic Arctic Grease

Amsoil Synthetic Arctic Grease utilizes extreme cold weather properties and quality protection for equipment operating in fridged climates where temps are well under 32 degrees. Use in Construction equipment, snowmobiles, ATV, trucks, backhoes, loaders or where ever cold weather grease in required.

Performance Features

Outstanding cold-temperature pumpability
Excellent mechanical stability
Superior protection against wear and corrosion
Long service life
Withstands high loads and pressures

Application Recommendation
AMSOIL Arctic Synthetic Grease is recommended for industrial machinery, heavy-duty automotive and industrial equipment, chassis, bearings, off-road and heavy equipment operating in arctic climates.

Compatibility
AMSOIL Arctic Synthetic Grease is compatible with many other types of greases. However, it is recommended that when changing greases, the equipment be cleaned of the old grease when possible or flushed with a liberal amount of Arctic Synthetic Grease while the mechanism is in operation. Closely monitor the system for any inconsistencies. Grease compatibility questions should be referred to your AMSOIL representative or AMSOIL INC.

AMSOIL PRODUCT AVAILABILITY
AMSOIL Arctic Synthetic Grease is available in 15-ounce cartridges.

AMSOIL PRODUCT WARRANTY
AMSOIL products are backed by a Limited Liability Warranty. For complete information visit www.amsoil.com/warranty.aspx.

HEALTH AND SAFETY
This product is not expected to cause health concerns when used for the intended applications and according to the recommendations in the Safety Data Sheet (SDS). An SDS is available via the Internet upon request at (715) 392-7101. Keep Out of Reach of Children.

Typical Technical Properties - Arctic Synthetic Grease (GEC)
Thickener	calcium sulfonate complex
NLGI consistency grade	1
Penetration (25°C [77°F], 0.1 mm) worked 60 strokes (ASTM D217)	310-340
Operating Range, °F (°C)	-75 to 315 (-59 to 157)
Four-ball wear test, mm scar (ASTM D2266)	0.51
Four ball EP, kgf (ASTM D2596) Weld point Load wear index	400 56
Timken OK load test, lbs (ASTM D2509)	60
Low-temperature torque, N•m (ASTM D4693) (-40°C [-40°F]) (Starting, Running torque)	1.28, 0.58
LT-37 US Steel Mobility @ 0°F (g/min)	156.5
US Steel Mobility @ -20°F (g/min)	81.5
Dropping point, °F (°C) (ASTM D2265)	>550 (>288)
Rust and corrosion (ASTM D1743)	pass
Oil viscosity, 40°C (104°F), cSt (ASTM D445)	22.30
Viscosity Index (ASTM D2270)	125
Color	tan
Texture	smooth

Amsoil Ordering Menu